We manufacture and export international quality standard geared lathe machines, which are widely demanded by government organizations under the DGS&D rate contracts. These geared lathe machines are offered by us in rigid and box section type extra double walled configurations. Our machines are provided with hardened & ground steel gears, which are mounted on precision spline shafts and offer smooth and excellent performance. They are further equipped with wide bed to provide maximum torsional stiffness. We offer these machines in different models to meet the requirements of different clients.

Specifications	KRS-25C/100	KRS-25C/150	KRS-25C/200
Center Height	250 mm	250 mm	250 mm
Width of Bed	325 mm	325 mm	325 mm
Admit between Centers	1000 mm	1500 mm	2000 mm
Spindle Bore	53 mm	53 mm	53 mm
No. of Spindle Speeds	8	8	8
Range of Spindle	45-1000	45-1000	45-1000
Range of Threads	2-56 TPI 0.5-14 mm 0.125-3.5 Module	2-56 TPI 0.5-14 mm 0.125-3.5 Module	2-56 TPI 0.5-14 mm 0.125-3.5 Module
Main Drive Motor	3 H.P	5 H.P	5 H.P

Roll turning lathe machines are used for proof and finish machining of rolls for rolling mills, cement plants, paper plants & heavy industries. These heavy duty roll turning lathe machines possesses high rigidity which, in conjunction have sufficient power drive to enable carbide tipped tools to be used to their full capacity. These lathe milling machines are usually equipped with with several carriages and special steady rests which allow the matting rolls to be set up.Their is also a provision for Electric drive of feed gear boxes in addition to the standard manual process. Technical Specification

Specifications	-	-	-	-	-	-	-
Length of Bed (mm)	3000	3500	4500	5000	6000	7500	9000
Width of Bed (mm)	450	500	500	500	500	650-1625	650-1625
Height of Centre (mm)	400	445	445	460	460	525-1400	525-1400
Spindle Hallow (mm)	80	90	90	105	115	130	130
Total Width of Gap (mm)	380	510	510	510	510	600	600
Width-of ?Gap in front of face plate (mm)	280	410	460	460	460	510	510
Swing over Saddle (mm)	600	660	660	690	690	760-2250	760-2250
Swing in Gap (mm)	1325	1525	1525	1575	1575	1675-3250	1675-3250
Admit between Centre (mm)	1600	2000	3000	3000	4000	5000	6000
Admit between Centre (mm)	55	60	65	65	65	65	70
Feed Shaft Dia (mm)	30	30	30	35	38	40	40
30 30 30 35 38 40 40	3	4	45	5	7	08/15/08	10/20/08
7.5	3	5	5	5	5	7.5	7.5

We are engaged in manufacturing, supply and export of superior grade heavy duty lathe machines, that find application in different industries. These heavy duty lathe machines comply the ISO guidelines and offer the users long life hassle free service. Use of corrosion proof and durable metal makes them capable of working under extreme conditions with minimum maintenance cost. Dimensionally accurate and functionally superior, these machines can be availed from us as in different heights, widths and other specifications.

Specifications	KRS - 45C/200	KRS - 45C/300	KRS - 50C/200	KRS – 50C/300
Center Height	450 mm	450 mm	500 mm	500 mm
Width of Bed	510 mm	510 mm	560 mm	560 mm
Admit between Centers	2000 mm	3000 mm	2000 mm	3000 mm
Spindle Bore	82 mm	82 mm	82 mm	82 mm
No. of Spindle Speeds	8	8	8	8
Range of Spindle Speeds	7-300	7-300	7-300	7-300
Tail Stock Quill Dia	85 mm	85 mm	105 mm	105 mm
Main Drive Motor	7.5 H.P	7.5 H.P	10 H.P	10 H.P

We are a trusted name engaged in manufacturing v-belt lathe machines with simplest design and robust construction. Their design assures precise performance, easy operation and higher productivity. For qualitative manufacturing, we use materials which are selected ones. Our v-belt lathe machines are manufactured strictly on quality basis to give long trouble free service, thus guarantee a precision and economic working and cuts cost ultimately.